Polvo Pads
Reusable Super Soak-Up Pads 2 per pack
Getting ready to defrost your fridge or freezer? Got a plumbing leak or washing machine spillage? You may come across these scenarios and you will need a solution to either contain the leak or help with clearing up the mess. Polvo Pads are your solution to these and many other regular spill or leakage incidents. Made from specially designed fibres to maximise absorbency, each pad will absorb up to 600ml (approximately one pint) of water making them ideal to help clear-up and manage fridge defrosts, washing machine leaks and similar spills. Polvo Pads are perforated making them easy to divide in two if required. In wet weather the sheets make great temporary door mats. The pads are also useful for wiping down shower tiles and other wet areas, and the best thing of all is that they are reusable! No need to waste paper towels, simply squeeze out, hang to dry and re-use! Each pack of 2 pads absorbs about 1.2 litres (over 2 pints) of water.
- Polvo PADS will quickly soak up water and other domestic liquids.
- Made from specially designed fibres to maximise absorbency.
- Safe and easy to use like all Flowtech LAP products.
- The sheets are perforated so can be easily divided in two if required.
How to use Polvo PADS:
- Place the sheet over the spill or under a fridge or freezer to absorb the liquid.
- When the sheet is saturated it can be wrung out and reused many times.
- In wet weather the sheets make good temporary door mats as boot and shoe stands.
- The sheets are also useful for drying showers, etc.
- For persistent leaks simply leave a sheet beneath the appliance.
Also available in packs of 100 for industrial and commercial use.
Polvo Snake
Dual-Purpose Draught Excluders for Garage, Shed & Pedestrian Doors
The Polvo range of draught excluders is designed to both stop draughts and absorb any water ingress beneath external doors.
Available in two sizes and two colours these dual-purpose draught excluders are made from resilient and flexible polypropylene material with super-absorbent qualities.
Each “Snake” will absorb over 3 litres of water per metre of length and can be removed from site without dripping.
The “Snakes” will dry out in-situ or can be hung out, dried and re-used.
The products are resilient against damage and will not burst if stepped on.
Makes in the UK using recycled materials.
Packed for retail in clear polybags with header cards and euroslots.
Polvo Snake
- 1.2 metre long in high visibility yellow and black colours
- Suitable for external doors such as sculleries, utility rooms and other external doors
- Stops draughts and absorbs over 3.5 litres of water
Polvo Super-Snake
- Length 3 metres x 80mm diameter; ideal for garage and shed doors
- This 3 metre long draught excluder is pushed against the gap beneath the door to prevent draughts and wind-blown leaves, debris and water entering the garage
- Absorbs over 9 litres of water
Polvo Super-Snake Hi-Viz
- Being the same size and qualities as the “Super-Snake” and benefitting from high visibility yellow and black colours to help avoid becoming a trip hazard
- Absorbs over 9 litres of water
Polvo Snake
Super Flat Absorbent Snake
Lightweight without reducing performance our new compact Spun-Bond Flat Snake has a 3.2 litre absorbency and can be removed without dripping.
With a large 13cm wide surface area and only 2mm thick when dry, the Spun-Bond Flat Snake’s construction places considerable material in contact with surface areas for better wicking and maximum saturation. Absorb fluids along walls, machine bases, and uneven ground and consequently minimize damage caused from leaks, drips and spills. This is especially effective absorbing chiller condensate and other water leaks keeping a safe area for staff and customers.
Filled with super-absorbent polyacrylate material mechanically modified to reduce its volume, each Spun-Bond Flat Snake absorbs and retains aqueous-based spills, coolants, solvents and water. Its durable, hydrophilic, polypropylene, skin expands when fully saturated without bursting.
The Spun-Bond Flat Snake can be printed with your design requirements at no extra cost and on fabric of your choice of colour. Although the standard hazard warning colour is yellow you may prefer white or grey or green or purple, etc.
Packaged in a durable cardboard dispensing box, each box contains a roll of 13cm X 120cm Spun-Bond Flat Snakes perforated at 1.2m intervals for ease of use.
Features:
- Made from spun-bond polypropylene skin and super absorbent filling.
- Reduced shipping costs.
- Reduced storage space.
- Handy dispensing box.
- Available in a variety of skin colours and printed to your requirements.
Spun-Bond Flat Snake |
||||||
|---|---|---|---|---|---|---|
| Format | kg/Box | Absorbency/Box | Size | Unit/Box | Boxes/Pallet | Item |
| 13cm | 1.90kg | 80 Litres | 1.2m x 13cm | 25 | 120 | 04SFS0025 |